QUALITY OF MATERIALS
In the case of Fujikura, it houses all materials (USA, Japan, Vietnam, and China) in large, commercial refrigerators at a constant 40˚F, 24 hours a day, 7 days a week. By maintaining this storage protocol, the relationship between the carbon fibers and resin is preserved.
Then Why are Ventus shafts so good? Ventus is promising better MOI for improved forgiveness, more ball speed from better energy transfer, and an extremely stable tip section without a boardy or harsh feel. … Players that need a more stable shaft but do not enjoy the feeling of rigid or harsh extra-stiff offerings will love the feedback and feel of Ventus.
Furthermore, Does Mitsubishi own Aldila?
In 2013, Aldila, Inc. was acquired by Mitsubishi Chemical and, today, both brands operate out of the same corporate headquarters in Carlsbad, California. Together, the brands share over 768 driver shaft wins on all major tours since 2004 and have supported more than 90% of major wins in the past three years.
Why do driver shafts cost so much? Titanium is the most common type of metal often used in drivers, and is the reason why golf drivers are so expensive. While Titanium is stronger and lighter than steel, it’s higher cost is the main reason why we don’t see titanium being used in irons and other clubs.
Table of Contents
What driver shaft is most used on tour?
Fujikura driver shafts are the most used by the top 100 PGA Tour players with 28 players using them including Justin Thomas, Jordan Speith, Dustin Johnson, Rory McIlroy, Scottie Scheffler and Louis Oosthuizen. The Ventus Blue 6X and Ventus Black 6X shafts are the most popular individual driver shafts.
What is the difference between Fujikura red and blue?
Fujikura Ventus Red Shaft
With a stiffer butt and tip section than Blue, the shaft is geared for high swing speed golfers who require a penetrating launch. With a more active tip section, Ventus Red was created to achieve slightly more launch and spin than Blue.
Is the Fujikura Ventus Blue a good shaft?
Ventus Blue
This shaft is right on the borderline of mid and low-mid launch. Also offered in a 56 gram version in R, S and X flex all the way to an 86 gram version, but only in S and X flex. Our testing shows more mid than low-mid ball flight. The VENTUS Blue 5S is a GREAT shaft for a lot of our golfers!
Is Fujikura Ventus a good shaft?
The Fujikura Ventus is extremely accurate. Consistently high ball speed. Among the lowest spinning shafts I’ve ever hit.
What does Aldila mean in Italian?
noun. the hereafter [noun] the next world; life after death.
How much should I spend on a driver shaft?
If you go with a name brand shaft in your driver, you may pay close to $200 for it. If you choose a knock off or cheaper graphite shaft, you may be able to spend about $30 to $40. The price of the shaft you choose should have a great deal to do with the clubhead that you are putting it in.
Does Puring a golf shaft worth it?
The Results
Our first myth is totally busted – PUREing a shaft led to significant distance increases. On average, our testers gained over 7 yards of total distance with the PUREd six iron compared to the non-PUREd club. … Players swung the PUREd club nearly 1 MPH faster and generated an extra 2.8 MPH of ball speed.
What is the most expensive golf shaft?
The world’s most expensive golf shafts are selling for $1,200 each, which equates to $16,800 to fit your entire bag. Step forward Seven Dreamers Laboratories Inc, a Japanese company founded with a stated mission of “creating things the world has never seen.”
Are Aldila shafts good?
Much smoother and easier to load. It was a stiff flex like I normally play, but just felt really good. On the tee box I found this shaft hit higher than the stock shaft, but spin was still about the same. While I didn’t have an accuracy problem with the stock shaft, the Blue was just a little tighter yet.
What driver shaft does Dustin Johnson use?
DJ’s SIM driver is coupled to a Fujikura Speeder 661 shaft, a classic choice with its blend of speed and stability. The shaft was first introduced in 1998 and remains a popular choice on tour. Dustin Johnson put the new TaylorMade SIM2 driver into play at the Tournament Of Champions in Hawaii, his first event for 2021.
What driver shaft does Rory McIlroy use?
In his iron setup, McIlroy uses ultra-stiff Project X 7.0 shafts. When he gets into his Milled Grind wedges, though, he goes with a slightly softer Project X 6.5 shaft.
What is the difference in the Fujikura shafts?
Difference Between Fujikura Ventus Blue and Fujikura Ventus Red. … The Fujikura Ventus Red is built to be a mid-high launch. The Ventus Blue is a mid-launch, and the Black is going to be the low launch. Typically speaking, as your driver clubhead speed decreases, you will need more launch coming from the shaft.
Who uses Fujikura Ventus on tour?
- Rory McIlroy (driver)
- Justin Rose (driver)
- Dustin Johnson (driver (at times), 3-wood)
- Sergio Garcia (won) with Black in all three woods and in the driver went to a 60-gram profile for the first time in years.
- Tommy Fleetwood now plays it in driver, 3-wood, and 7-wood.
- Matt Kuchar (driver)
What is the weight of the Fujikura Ventus red shaft?
TECHNICAL SPECS
| Model | Flex | Weight |
|---|---|---|
| Ventus Red 6 | R | 64.5 |
| Ventus Red 6 | S | 65 |
| Ventus Red 6 | X | 66 |
| Ventus Red 7 | S | 71 |
Are all Ventus shafts VeloCore?
No, only shafts that have the VeloCore logo near the tip have VeloCore Technology. “Stock” shafts that come already equipped in a new club do not have VeloCore.
What is the difference between Ventus blue and red?
Difference Between Fujikura Ventus Blue and Fujikura Ventus Red. … The Fujikura Ventus Red is built to be a mid-high launch. The Ventus Blue is a mid-launch, and the Black is going to be the low launch. Typically speaking, as your driver clubhead speed decreases, you will need more launch coming from the shaft.
What is Ventus 5 A?
Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile. … Maximum energy transfer from the tip section boosts the clubhead’s…
Can you switch shafts on drivers?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. … A new shaft can put the wallop back in your trusty driver and have it hitting like a brand-new club. One of the nice things about replacing a driver shaft is that there is generally no tip trimming involved.
How much of a difference can a driver shaft make?
GET FIT TO GET FAST
Using the right shaft can boost driver swing speed by 1 to 1.5 miles per hour—that equates to two to four more yards on a well-struck tee shot. Because most amateur tee shots are less than optimal, an increase in speed will result in much greater distance gains than achieved in robotic testing.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. … Steel shafts tend to offer the golfer more feed back and feel than its graphite counterpart, which can be part of the decision-making process when selecting the golf club.
