Determine the appropriate shaft length for your longest wedge. Golf iron shaft lengths will normally vary by a one-half inch between clubs getting shorter as the number of the iron is large. For example, if you are searching for a pitching wedge, the shaft should be one-half inch shorter than your 9 iron.
Then Should my wedges match my irons? “Always have wedges that match the spec and set up for your iron set,” Sherburne says. … Most wedges off the shelf come with a shaft that for many golfers might be too heavy and stiff. Your wedges are extensions to your irons so they should 99 percent be set up the same for proper gapping and dispersion.”
Furthermore, What size wedge should I get?
So generally think about putting in a gap wedge that’s 48 or 50 degrees, a sand wedge that’s between 54 and 56 degrees, and a lob wedge that’s between 58 and 60 degrees. These are general guidelines, make sure you’re working with your fitter to get the gapping that works best for you.
How long should a 60 degree wedge be? You will want to hit your 60 degree wedge between 75 and 90 yards to score well. If you are hitting it over 100 yards you are swinging too hard.
Table of Contents
Is it important to get fitted for wedges?
Getting the right lie angle for your wedges is extremely important. This affects how the heel and toe of the club interact with the turf. … When you have a scoring club in your hand you want to make sure you get the ball as close as possible to the pin. Getting this part of the fitting correct can have the most impact.
How do I get fit for wedges?
Can you bend wedges upright?
Why are wedges so heavy?
One of the main reasons a wedge is heavier is that the head has a thick cover of metal for golfers to be able to dig down at the golf ball and achieve a higher ball flight. This metal is usually chiseled and balanced so that the golfer will be able to hit the center of the club face more easily.
What wedges does Phil Mickelson use?
Mickelson, one of the best short game players of all time, carries three Callaway wedges at the moment. He uses three PM Grind ’19 “Raw” wedges. The PM stands for Phil Mickelson because he helped design the wedges with Roger Cleveland.
How do you pick a wedge?
The key in choosing a set of wedges is to make sure that there are no big gaps in loft between the lowest lofted iron in your set and the first wedge and then also between edge wedge. Try to keep the lofts gaps to around 4 degrees between each club.
What degree wedges should a high handicapper carry?
High handicappers should carry at least a 56-degree wedge. In addition, it makes sense to have a 52-degree wedge and a 60-degree wedge to have a variety of shots. The thing that you have to pay attention to is the loft gapping in the set. Wherever possible, ensure that you are not leaving large loft gaps between clubs.
How far can a pro hit a 60 degree wedge?
On average, a professional golfer will hit a 60-degree wedge about 100 yards. A mid-handicap golfer will probably hit their 60-degree wedge about 50-60 yards. A higher handicap golfer will probably hit their 60-degree wedge about 30-40 yards.
What is the best degree wedge for chipping?
Most people would agree that something around 56 degrees of loft is going to be best for chipping. A wedge with this loft seems to have the right amount of height, spin, and maneuverability to help you get shots around the green completed with ease.
How far should an amateur hit a 60 degree wedge?
A 60 degree wedge distance is 70 yards for an average amateur golfer and 90 yards for an average professional golfer using their lob wedge.
How much does a wedge fitting cost?
Wedge Fitting – $125
You want to maximize versatility with proper distance gapping between clubs while looking at appropriate grind for your swing and typical course conditions.
How do you fit yourself for wedges?
How do you pick golf wedges?
The key in choosing a set of wedges is to make sure that there are no big gaps in loft between the lowest lofted iron in your set and the first wedge and then also between edge wedge. Try to keep the lofts gaps to around 4 degrees between each club.
Should my wedges be flat or upright?
“Wedges are typically too upright and fit for full swing,” Sieckmann said. “And you’re not using it for full swing very often — you’re using it from 10 yards, 20 yards or in the bunker. The fit, specifically with a lob wedge, should be for a 20-yard shot, not an 80- and 90-yard shot.”
What should my wedge lie angle be?
So generally think about putting in a gap wedge that’s 48 or 50 degrees, a sand wedge that’s between 54 and 56 degrees, and a lob wedge that’s between 58 and 60 degrees. These are general guidelines, make sure you’re working with your fitter to get the gapping that works best for you.
Should my wedges be flatter?
With the least amount of deflection, or droop, occurring with wedges, they need to be played flatter compared to your irons to make sure the face is pointed towards the target at impact—and just as importantly, to be sure the sole interacts properly with the ground.
Should wedges have a heavier swing weight?
Be sure and check the swing weight of your wedges and use this rule of thumb: Pitching wedges and gap wedges should be 2 to 3 swing weights heavier than the #9 iron in your set. Sand wedges and 60º wedges should be 4 to 6 swing weights heavier than the #9 iron.
Should wedge shaft be heavier?
My PW is still the 105 and I had to get rid of that club and get another matching RTX-3 CB wedge with the 120 shaft as I was losing distance and consistency with just the M2 Tour set PW. Since making that change I have gain back the lost yardage and the consistency is way up. Any one have the same issues or set up?
Do sand wedges weigh more?
Golfers hit wedges more often during a round than any other club in the bag, other than the putter and driver. … The sand wedge is also four to eight swing weights heavier than the other irons, and the width of the sole is the widest.
What wedges does Dustin Johnson use?
DUSTIN JOHNSON WEDGES
Dustin uses TaylorMade Milled Grind wedges, with both a 52˚ and 60˚ model in his bag. While they are the predecessor to TaylorMade’s newer Milled Grind 2 wedges, they feature the same milling process that creates precision consistency on the sole grinds and sharp grooves for spin and control.
What clubs does Bryson Dechambeau use?
Bryson Dechambeau Irons
Bryson’s four and five irons are high-launching, cavity-backed Cobra Speedzone One Length irons while the rest of his set are Cobra King Forged Tour One Length Irons – built for performance and workability but now superseded by Cobra King Forged Tec One Irons.
What clubs does Bryson Dechambeau have in his bag?
Known as the ‘Golfing Scientist’, he is a Cobra-Puma ambassador and has a Cobra King Radspeed driver in the bag which has only 7.5 degrees of loft. He then carries a Cobra King Prototype B 2-wood and a Speedzone Tour 5-wood which have 10.5 and 13.5 degrees of loft respectively.