Yamaha Timberwolf 250’s engine needs such lubricants or oil, it’s usually use kind of 1,3 – 1,4 liters oil Capacity with complete mineral engine oil that available somewhere in the store. the oil specification is likely 10W-40.
Base Price
Options (Change)
Total Price
Table of Contents
What size is a Yamaha Timberwolf?
Size. The Yamaha Timberwolf 250 is a compact all-terrain vehicle. The total weight of the ATV when dry and clean is 438 lbs. The ATV is 72 inches from the front bumper to the rear bumper and approximately 40 inches wide.
What kind of oil does a Yamaha Moto 4 take?
What kind of oil does a Yamaha Moto 4 take? Yamaha Moto 4 350 ATVs need 2.2 quarts of wet clutch compatible 10W-40 motor oil, which can be regular or synthetic.
What kind of oil does a 4 wheeler take?
Traditional automotive motor oils are usually 10W-30 or 5W-20 viscosity; however, Polaris for instance, uses a 5W-50 viscosity for their off-road engines.
How fast does a Yamaha Moto 4 go?
about 35-45 mph
What’s the difference between ATV oil and regular oil?
While ATV and motorcycle oil share very similar properties, there are slight differences between them. ATV oil is rated JASO MA, while motorcycle oil can be rated JASO MA2 or MB. This means normally for a manual wet clutch they are the same, but for an auto clutch ATV you should use ATV (JASO MA) oil.
How fast does a Yamaha Timberwolf go?
72.15mph
How much oil does a Yamaha Timberwolf hold?
The Yamaha Timberwolf is a mid-size ATV with a 250 cc, four-stroke, air-cooled engine. The ATV uses standard four-stroke engine oil and holds 2 1/2 qts. in the crankcase. On the bottom of the crankcase is a 1/2-inch nut that is the drain plug.
What years did Yamaha make the Moto 4?
Starting out with 80- and 200-cc models, the YFM 350 Moto-4 was introduced in 1987. The YFM-350ER is the designated Moto-4 model, lasting from 1987 until 1995, before becoming various named models, including the Warrior, Raptor Big Bear and other YFM designations.
Is there a difference between 4 cycle oil and regular oil?
2 cycle or stroke oil is formulated to be mixed with the gasoline as the 2 stroke engine rarely has an oil reservoir and the oil in the gas lubricates the internal engine parts. 4 cycle oil is just normal regular oil that you use in your car as it is purely a lubricant in your 4 stroke car engine.
How do I know if I have a Yamaha Moto 4?
Identify the Yamaha VIN. According to ATVStyle.com, positions four through eight are the model designation code. Entering the complete 17-position VIN on a Yamaha VIN decoder, similar to the one found on Motoverse (see Resources), will identify the YFM-350ER.
How do you tell what year my Yamaha Moto 4 is?
Locate the tenth digit of the VIN. It may be a letter or a number. Utilize the following key to determine the model year of the vehicle: 1982 – C, 1982 – D, 1983 – E, 1984 – F, 1985 – G, 1986 – H, 1987 – I, 1988 – J, 1989 – K, 1990 through 2000 – Y.
How much oil does a Yamaha 250 take?
The Yamaha 250cc engine is a popular choice for sport and recreational motorcycle riders. While the specifications differ slightly from model to model, Yamaha 250cc engines generally use between 1.3 and 1.4 liters of oil.
What does YFM mean in Yamaha?
no means comprehensive
What is a Yamaha Moto 4?
The Moto-4 was the first Yamaha 4-Wheel ATV. It featured a 196cc 4-stroke engine, a snorkel air intake, shaft drive, electric starter, centrifugal automatic clutch, and racks front and rear. A unique feature of this model was a practical reverse gear.
What kind of oil does a Yamaha 250 take?
10W30
Don’t forget to share this post !
References
