Apron. The apron is a part of a lathe that’s clamped to the saddle. It’s designed to hold the gears, levers and other components that push the cross slide. Along with the saddle, the apron is a key component of the carriage, which as mentioned above, is used to guide the lathe’s tool bit.
Subsequently, What is cross slide in lathe? Definition of cross slide
: a member of a machine (as of a lathe) on which the tool carriage moves at right angles to its principal direction of travel.
What is a feed rod on a lathe? Feed Rod. The feed rod transmits power from the headstock to the carriage for feeding operations. Lead Screw. The lead screw transmits power from the headstock to the carriage for screw thread cutting operations.
Considering this What is half nut mechanism? The half nut or split nut is used for thread cutting in a lathe. It engages or disengages the carriage with the lead screw so that the rotation of the leadscrew is used to traverse the tool along the workpiece to cut screw threads.
Table of Contents
What is a lathe chuck?
Lathe chucks are used to accurately clamp a workpiece on a lathe for turning operations or can be used on an indexing fixture for milling operations. Manual lathe chucks manually open or close jaws with a screw or pinion. … Cast Iron (Semi-Steel) is the industry standard for chuck body material.
Secondly What is feed rod? Feed rod is a power transmission mechanism used for precise linear movement of the carriage along the longitudinal axis of the lathe.
What is the use of chuck? A chuck is a specialized type of clamp used to hold an object with radial symmetry, especially a cylinder. In a drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool or workpiece.
What is a half nut on lathe? A split nut assembly is often used in positioning systems, for example in the leadscrew of a lathe. … The two halves of the nut have chamfered ends (60° to axis), which helps the threads to find engagement during the closing action. Usually the screw and nut are also oiled for lubrication.
Why is half nut used in lathe?
The half nut or split nut is used for thread cutting in a lathe. It engages or disengages the carriage with the lead screw so that the rotation of the leadscrew is used to traverse the tool along the workpiece to cut screw threads.
What is half nut lever? A lever-operated mechanism that resembles a split nut that can be closed on the lead screw of a lathe when threads are being. Engineered Media.
What does the spindle do on a lathe?
Lathe spindles are used for machine-cutting of workpieces. They can also be referred to as workpiece spindles, as the workpiece is clamped via the chuck of the lathe spindle. The rotating workpiece is machined by the tool attached to the driven machine axis.
What is taper turning? Taper turning is a machinings operation, which means that the diameter of cylindrical workpieces gradually decreases from one part to another. The taper can be external or internal. If the workpiece is taped outward, it has an outer taper. If it is taped inward, it has an internal taper.
What is apron mechanism?
Apron is attached to the carriage and hangs over the front side of the lathe bed. It is useful in providing power and hand feed to both carriage and cross-slide. It is also used to provide power feed to the carriage during thread cutting through two half nuts.
What is a mandrel?
Definition of mandrel
1a : a usually tapered or cylindrical axle, spindle, or arbor inserted into a hole in a piece of work to support it during machining. b : a metal bar that serves as a core around which material (such as metal) may be cast, molded, forged, bent, or otherwise shaped.
What is the difference between live center and dead center? To put it simply a dead center is just that – dead. It has no moving parts. It is really nothing more than a metal shaft with a point. A live center is similar, but the shaft has a bearing that allows it to turn.
What is cutting speed in lathe? Cutting speed is defined as the speed at which the work moves with respect to the tool (usually measured in feet per minute). … Cutting speed and feed determines the surface finish, power requirements, and material removal rate.
What is lead screw in lathe machine?
A leadscrew (or lead screw), also known as a power screw or translation screw, is a screw used as a linkage in a machine, to translate turning motion into linear motion. … Leadscrews are commonly used in linear actuators, machine slides (such as in machine tools), vises, presses, and jacks.
What is four jaw independent chuck? a device that holds a workpiece in a lathe or tool in a drill, having a number of adjustable jaws geared to move in unison to centralize the workpiece or tool. b. Also called: four jaw chuck, independent jaw chuck. a similar device having independently adjustable jaws for holding an unsymmetrical workpiece.
Is chuck from angry birds?
Chuck is the deuteragonist in the Angry Birds series of games created by Rovio Entertainment and the tritagonist of Angry Birds Toons. He was first introduced in 2009 with the original launch of the game. He is a Wild Canary.
What is the defective of chuck? A broken chuck is considered a serious seam defect, due to absence of tightness at the point of the defect. DESCRIPTION: A portion of the double seam which is not properly ironed-out because of a void in the chuck lip (insufficiently tight), and appearing as an irregularity on the countersink wall of the seam.
Why is it important not to disengage the half nut lever during the threading operation?
At the end of the thread pass, back out the tool, but do not disengage the half nut lever. Because the thread is a non-inch standard or odd pitch metric thread, you can never disengage the half nut until the metric thread is completely cut to depth. … With the half nut still engaged, the tool will reverse direction.
What is the use of tumbler gear? Tumbler gear mechanism is used to change the direction of lead screw and feed rod in lathe machines. By Engaging tumbler gear, the carriage can be moved automatically from tailstock end to headstock. End or moved from headstock end to tail stock end. E is the gear attached to the spindle.
