The CompR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details. *Assumes typical music program with minimal amplifier clipping; varies with enclosure size.
Also, Are Kicker Comp C Subs good?
The Kicker CompR subwoofers offer hard-hitting bass that is accurate and designed for sound quality. … If you are looking for hard-hitting, accurate bass, the Kicker CompR subwoofer is a great choice because the CompR has enough power handling to get you the output you expect from a “Step-up” subwoofer.
Considering this, What hits harder 2ohm or 4ohm?
A subwoofer with a lower electrical resistance produces a louder sound than one with a high electrical resistance, which means that 2ohm subwoofers are louder than 4ohm ones.
What hits harder 1ohm or 4ohm?
If we talk in technical terms 1-ohm impedance will hit harder than 4 ohms to create more output when given with similar wattage, just because of the low impedance.
Hereof, Can a 1000 watt amp push 2 15s? Just make sure your 15″ subs have a rms rating of 1000 watts…. because under powering your subs is worse than overpowering them. And GUH. see less Yes, it will push two 15’s easily.
Table of Contents
Is 4ohm or 2ohm better?
Overview. 2 Ohm Subwoofers will produce more sound output on less wattage than 4-ohm subwoofers. This makes 2 Ohm systems less expensive and best for most consumers. 4 Ohm Subwoofers will be more expensive but will produce a better overall sound quality.
Whats better Comp C or COMP R?
Their are different CompR models and different CompC models some CompR come in 2 ohm and 4 ohm and some CompC come with Dual voice coils and others don’t. … To basically sum it up if you are looking for a better cleaner bass the CompR is for you but if you want a cheaper woofer the CompC is still good quality.
Are 10 inch kicker subs good?
Great sound for the price
I have 2 of these 10” subs bridged from a 4 channel 1000w peak power 2 x 240w RMS amp and they really deliver! Even from a sealed cab they are clean crisp and deliver smooth crystal clear bass. When paired with the 4 x 70w RMS 6.5” 4-way speakers in my car they fall right into a perfect mix.
Is 1 ohm bad for an amp?
if an amp is designed to be 1 ohm stable, then its ok. running an amp not designed to do it can/will end up bad.
Is it better to run subs in series or parallel?
While series wiring of multiple subs increases the total effective impedance, parallel wiring of multiple loads lowers the total effective impedance. With subwoofers rated at equal impedances, the system impedance is equal to the impedance of one sub voice coil divided by the number of subs.
Does sealed or ported hit harder?
Undoubtedly, ported boxes can deliver louder, booming bass with more punch and reverberance than sealed boxes. This is easily achieved with a ported subwoofer box without using any additional sound equalizer or digital processor. This is due to the greater cone freedom of motion offered by ported boxes.
Is 1 ohm a lot?
A single ohm (1 Ω) is actually a very small amount of resistance. Resistances in the hundreds, thousands, or even millions of ohms are usually called for in electronic circuits.
What ohm is best for subs?
If you want bass at a moderate volume and in the best quality, then a 4 ohm subwoofer will be your best bet. Also, you’ll need to connect multiple subwoofers in series for higher resistance, thus higher quality bass.
How many watts can a 40 amp fuse handle?
40-amp 240-volt circuit: 40 amps x 240 volts = 9,600 watts.
How many RMS is 1000 watts?
In this case, about 1000 watts RMS, SSL’s website rates it at 1250 RMS.
Is 1-ohm bad for an amp?
if an amp is designed to be 1 ohm stable, then its ok. running an amp not designed to do it can/will end up bad.
Does higher ohms mean better sound?
So yes, higher the ohms better the sound experience; that is dependent on if you’re using the appropriate amp to provide the required power, 100 ohms headphones plugged into a laptop will not get you the experience you expected, as most laptops support an impedance of only up to 32 ohms.
What is the best subwoofer brand?
Top 11 Best Subwoofer Brands (Car, PA, Home & Studio)
- Pioneer.
- QSC.
- Alto Professional.
- Electro-Voice.
- JBL.
- Polk Audio.
- Klipsch.
- Yamaha.
What Kicker sub is best?
If you want a round subwoofer and you want the best that Kicker has to offer, the CompQ is definitely the way to go. Best Entry Level Kicker Subwoofer. Kicker CompC. If you just need to add some bass, you are on a budget, or new to car subwoofers, the Kicker CompC is our favorite entry level sub.
Do I want a 2 ohm or 4 ohm sub?
Basically, a 2 ohm subwoofer demands less power from the amp and tends to deliver louder bass. On the contrary, a 4 ohm subwoofer will demand more power from the amp and deliver less loud but higher quality bass. Thus, make your choice depending on the kind of bass you want.
How much does a 10 inch subwoofer weigh?
Many factors are affecting the weight of the sub-woofers. Size and power are just two of them. So, if you want to listen to loud and deep bass, your sub-woofer must have adequate size.
…
| Type | Weight Range (lb) |
|---|---|
| 8″ | 5 – 11 |
| 10″ | 6 – 31 |
| 12″ | 10 – 50 |
| 15″ | 12 – 40 |
What makes a good subwoofer box?
Enclosures should be built with very dense and heavy wood. We recommend MDF (medium density fiberboard) or Medite (high density fiberboard), They are rigid, heavy and not porous like some particle boards. We recommend 3/4″ (19mm) MDF although 1/2″ (12.5mm) MDF is acceptable for woofers 8″ and smaller.
Is 2 Ohm or 1 ohm better?
At 1 ohm, you will get more power output from your amplifier and your subwoofers will play louder than if you wired them to a 2 ohm load. You can also save some money by wiring your subwoofers to a 1 ohm load.
Can a 1 ohm amp run 2 ohm?
Two 1-ohm subs can easily be wired in series for a 2-ohm load. Due to back EMF, series connections between two or more drivers should be avoided. All driver-to-driver wiring should be done in parallel. Series connections are perfectly fine between the voice coils of individual DVC drivers.
Is it better to run 1 ohm or 2 ohm?
1 ohm or two ohm makes absolutely no difference, it simply depends on what load the amplifier was designed for, what the amp circuits were optimized for. Everything else being equal, an amp built for and running in 1 – ohm will behave exactly the same as an amp designed for and running in 2 – ohms.
